ALL WELDS CONTINUOUS UNLESS OTHERWISE STATED. 未注焊缝均为连续焊
ALL WELDS 3mm FILLET UNLESS OTHERWISE STATED 未注焊角高3mm.
ALL UNSPECIFIED RADI - R3 未注圆角R3
REMOVE ALL BURRS AND SHARP EDGES 棱角倒钝/所有尖角/棱角倒角并去毛刺
CHANNEL 槽钢
RSA 708 角钢 70X70X8
M30X1.5 pitch M30X1.5的锥螺纹
Tackweld 点焊
OD 1/4" outside dimension 1/4"的缩写 外径直1/4"
75 CRS 尺寸为75 材质为冷轧钢板
410 OPENING REF 410 开口参考尺寸
40 REF 尺寸为40,参考值
2.5" BSP 2.5" 圆锥管螺纹
2.5" BSPT HEXAGON 2.5" 六角圆锥管螺纹(即对丝)
30x2.5 FLAT BAR 30X2.5 扁钢
TYP 2 POSNS 2处
11 TOTAL COILS APROX.9 WORKING COILS APROX.RIGHT HAND WOUND ONLY,END COILS SQUARE TO TOUCH.
总圈数约11圈;工作圈数约9圈;右旋;弹簧的端部磨平以便于接触.(此为弹簧技术说明)
FEMALE: 内扣(母扣)
MALE: 外扣(公扣)
偏心轴 eccentric shaft
销轴 PIN
开口销 COTTER PIN
螺杆 screw
紧定螺钉 SET SCREW
圆螺母 ROUND NUT
内六角螺钉 SOCKET HEAD CAP SCREW
六角螺钉 HEX HD SETSCREW
六角螺栓 HEX HD BOLT
挡圈 closing ring
弹性挡圈 circlip
轴承隔套 distance sleeve of axletree
轴承 axletree
深沟球轴承 DEEP GROOVE BALL BEARING
无扣长 non-buckle length
弹簧 SPRING
吊环螺钉 LIFTING EYE BOLT
开槽盘头螺钉 SLOTTED PAN HEAD SCREW
圆锥滚子轴承 TAPERED ROLLER BEARING
推力球轴承THRUST BALL BEARING
平键 FLAT KEY

下一页